• Costa Concordia - The Shipwreck Removal Project

    Costa Concordia sank off the italian coast on 13th january 2012.Now Costa Crociere will salvage the cruise ship and remove it. also see "Costa Concordia disaster "

    published: 02 Oct 2012
  • Project Baseline St.Lawrence River - Survey of the A.E. Vickery shipwreck

    The Northeast Underwater Explorers embarked on their first project to create a baseline of measurements and observations of the shipwreck, A. E. Vickery. The information will be documented and posted for future reference for the purpose of evaluating the deterioration over time and making decisions about its conservation. The A. E. Vickery was a three masted schooner built and launched in 1861 as the "J.B.Penfield". She was renamed in 1884 as the A. E. Vickery. She was sailing from Chicago to Prescott carrying a cargo of 21,000 bushels of corn. On August 15, 1889 in the St. Lawrence River she had to make a tack to clear the lighthouse on Rock Island but missed stays in coming about and struck a shoal. She hung on to the rocks for 4 hours before slipping beneath the waters. No one on board ...

    published: 31 Aug 2013
  • 19 Most Famous Shipwrecks

    After a life at sea, where do ships and submarines go when they retire? Why, they haunt still shores or stayed beached on dry land as they slowly rust and erode. Here are some of the most famous shipwrecks where they ended up. Subscribe to Talltanic http://goo.gl/wgfvrr 10. Sleeping Bear The shipwrecks found beneath the water’s surface in Sleeping Bear on located near the Lower Peninsula of Lake MIchigan. A famous ship found here was the Francisco Morazan, which sailed off from the city of Chicago back in 1960. There was over 940 tons of cargo when it was met with fog and snow, which proved too much for the ship. In the end, it was abandoned by the next month, which left the ship to just sink and rust into the lake waters since the owners of the ship were never found and there was n...

    published: 16 Jun 2017
  • ABANDONED SHIPWRECK visited by US Navy Divers

    The up-and-coming device is known as the Dive Buddy Remotely Operated Vehicle (DBROV). The Dive Buddy is a purpose-built hybrid vehicle that can be operated as a ROV, a Diver Propulsion Vehicle (DPV), an Autonomous Underwater Vehicle (AUV), or any combination of the three. Lee Cofer, NSWC PCD electronics engineer and Dive Buddy project lead, says the DBROV has a variety of beneficial aspects which will significantly improve efficiency and effectiveness of the diver’s assignments. “I believe all Navy diving will benefit from the Dive Buddy, in particular, expeditionary diving,” said Cofer. Cofer said the Dive Buddy was created to fulfill the need for a fly-away, agile base unmanned underwater vehicle (UUV) platform with autonomous capabilities that is scalable and adaptable to the diver...

    published: 09 Nov 2016
  • Sunken Ship Rescue New Documentary: "ADVENTURE OF SOMEONE" (2015) (HD)

    Follow the epic operation to secure, raise, and salvage the Costa Concordia cruise ship, which ran aground and tragically capsized off the coast of Italy on January 13, 2012, killing 32 people. The massive wreck—with a 160-foot-long hole in its hull—stretches the length of three football fields, weighs 45,000 tons, and was half submerged on the site of a protected reef. Moving it from its precarious perch on the edge of an underwater cliff turned into a technical and logistical challenge of staggering proportions. Join NOVA as we follow a team of more than 500 divers and engineers working around the clock as they attempt the biggest ship recovery project in history. Follow the epic operation to secure, raise, and salvage the Costa Concordia cruise ship, which ran aground and tragically cap...

    published: 10 Feb 2016
  • Shipwreck Letterpress (Kickstarter Video)

    Hand made, paper cut, cards, invitations, and curios. Check out the Kickstarter campaign here: https://www.kickstarter.com/projects/1514646006/shipwreck-letterpress

    published: 18 Aug 2017
  • Simple Wood Projects: Make a Cutting Board

    Watch a few of Eagle America's most popular router bits in action in this simple cutting board project video! Then visit http://bit.ly/2aH98Uq for more detailed information about our 8-Piece, Complete CNC Router Bit Sets.

    published: 03 Jun 2016
  • New Shipwreck Discovered with GoPro and ScoutPro Housing! 900ft (300m) Deep!

    A huge congrats to Mr. Aharon "Ronnie" Sade of Yam-Yafo Ltd. for discovering a new uncharted, unknown shipwreck off the Israeli Coast. This unidentified wreck is over 900ft deep (300m). Mr. Sade was using a GoPro and our specialized extreme depth underwater housing. For such a fantastic discovery, GroupBinc.com is naming Mr. Sade as our Explorer of the Year. Mr Sade's company , Yam-yafo Ltd, is a Marine Projects & Data Providers Business. Based in Israel and known as the local market leader for marine geographic Information services since 2011. They assist both public and private sector organizations deliver their marine responsibilities. Again, a big congrats to Mr Sade for exploring the deep seas and discovering this shipwreck. We look forward to see more footage! Copyright Groupb...

    published: 04 Dec 2013
  • Shipwreck Ft. Mia Vaile - Pain (Non Copyrighted Trap)

    Music That Lifts Up Your Day! Help us reach 100k! http://tinyurl.com/p2hcmgo Download this song here for free [subscription to channel required]; http://tinyurl.com/gqkovqc -- Audio Spectrum, Background, and Intro By; http://tinyurl.com/j9vl6al -- ►Copy and paste the following to use in your description!; Support ÉWN; ► Soundcloud; https://soundcloud.com/ewnmusic ► Facebook; https://www.facebook.com/ewnmusic/ Support FlyingTunes; ► Youtube; https://tinyurl.com/hr534uv ► Twitch; https://www.twitch.tv/flyingtuneslive ► Twitter; https://twitter.com/FlyingTunesYT ► PSN; FlyingTunesPlays ► Instagram; https://www.instagram.com/flyingtunesft ► Vabble; http://www.vabble.com/profile/FlyingTunes/wall ► Vine; https://vine.co/u/1330988332674613248 ► SnapChat; flyingtunes ► Spread Shirt; https://sh...

    published: 23 Oct 2016
  • How To CNC 3D Carve Aluminum & Wood to Create "Shipwreck" using CorelDraw, ArtCam and Amana CNC Bits

    http://www.toolstoday.com Watch this video as we 3D carve a custom-designed CNC distressed art project "Shipwreck" from 0.07" thick aluminum and 1-1/2" thick wood using Amana Tool®’s industrial solid carbide CNC router bits. Sketching the concept with a pencil, Pierre-Luc Arseneau from CNCcraze.com draws the ships hull with riveted panels and the gears inside representing the engine. Knowing this will be 3D carved on his CNC machine, Pierre precisely draws each rivet and gear to look similar to a ship relic from the early 20th century. Pierre scans the drawing, imports the file into Corel Draw and begins to trace his artwork creating the vectors. After creating the digital render for both the exterior aluminum hull and the underlaying wood gears, he opens the file with ArtCam to create a...

    published: 08 Nov 2016
  • SHIPWRECK on Farland Isle Adventure Project for D&D Part1

    DM Scotty Shows you how to easily and cheaply craft ship wreak pieces for your own Island adventures. Follow DM Scotty's Facebook group for DM's Craft updates and info: https://www.facebook.com/groups/dmscottyscraftsngames/ Visit the DM's Craft Forum to meet other crafters, see cool pics of crafted stuff and pick up great tips and tricks: http://dmscraft.proboards.com/ A special thanks to Mad Lad Designs, AJ and DMG for helping to moderate The DM's Craft forum. Also vist TheDMGinfo channel for more great 2.5D projects and ideas: https://www.youtube.com/channel/UCJLqz6kcB1gMPiVnL0XfUDg

    published: 17 Apr 2014
  • How to make Shipwreck chart Nautical Coasters Easy DIY for Beach decor homes.

    How to make nautical shipwreck chart Coasters. Easy DIY (Do it yourself) project. Unlike many coaster how to videos that just use Mod Podge we recommend using a two part epoxy so the finished drink coasters will hold up to both hot and cold drinks. Check out our other DIY projects. WEB http://www.diyeasycrafts.com/ DIY Nautical Themed Projects http://www.diyeasycrafts.com/diy-nautical-ideas-and-projects.html Please join us on: FACEBOOK https://www.facebook.com/groups/1668357033451028/ PINTEREST https://www.pinterest.com/wreckvalle/diy-easy-crafts/ #DIYeasycrafts

    published: 29 Mar 2015
  • Finished Shipwreck on Farland Isle Adventure Project for D&D Part2

    DM Scotty finished up those wrecked ship pieces and shows you what they look like washed up on Farland Isle. Follow DM Scotty's Facebook group for DM's Craft updates and info: https://www.facebook.com/groups/dmscottyscraftsngames/ Visit the DM's Craft Forum to meet other crafters, see cool pics of crafted stuff and pick up great tips and tricks: http://dmscraft.proboards.com/ A special thanks to Mad Lad Designs, AJ and DMG for helping to moderate The DM's Craft forum. Also vist TheDMGinfo channel for more great 2.5D projects and ideas: https://www.youtube.com/channel/UCJLqz6kcB1gMPiVnL0XfUDg

    published: 21 Apr 2014
  • Mardi Gras Shipwreck Project – Artifacts 03

    Mardi Gras Shipwreck ProjectArtifacts - 03. http://nautilusproductions.com/projects/mystery-mardi-gras-shipwreck-documentary. The re-release of these project videos celebrates the publication of the Society for Historical Archaeology’s Journal, Historical Archaeology Mardi Gras Shipwreck Thematic Issue and the 10 year anniversary of the expedition. Nautilus' intellectual property is copyrighted & not in the public domain but can be licensed at; http://nautilusproductions.com/stock-footage. All of the content on this channel, including, but not limited to photos, video, images and text are the exclusive intellectual property of Nautilus Productions. This content is protected by US and International copyrights. No content may be copied, reproduced, republished, altered, transmitted or dis...

    published: 14 Aug 2017
  • Fasteners on a Stone Fleet Shipwreck

    A brief clip of underwater footage of some copper-alloy fasteners observed on a wreck of a whaling vessel from the second Stone Fleet sunk off the coast of Charleston in January 1862. This footage was shot April 22, 2015 during the Charleston Harbor Stone Fleet Survey Project. For moe info and updates on Maritime Research Division projects past and present, see our website: http://artsandsciences.sc.edu/sciaa/mrd or follow us on Facebook: www.facebook.com/MaritimeResearchDivision

    published: 08 May 2015
  • Mardi Gras Shipwreck Project – Launch 01

    Mardi Gras Shipwreck ProjectLaunch 01. http://nautilusproductions.com/projects/mystery-mardi-gras-shipwreck-documentary. The re-release of these project videos celebrates the publication of the Society for Historical Archaeology’s Journal, Historical Archaeology Mardi Gras Shipwreck Thematic Issue and the 10 year anniversary of the expedition. Nautilus' intellectual property is copyrighted & not in the public domain but can be licensed at; http://nautilusproductions.com/stock-footage. All of the content on this channel, including, but not limited to photos, video, images and text are the exclusive intellectual property of Nautilus Productions. This content is protected by US and International copyrights. No content may be copied, reproduced, republished, altered, transmitted or distribu...

    published: 14 Aug 2017
Costa Concordia - The Shipwreck Removal Project

Costa Concordia - The Shipwreck Removal Project

  • Order:
  • Duration: 2:41
  • Updated: 02 Oct 2012
  • views: 21723
videos
Costa Concordia sank off the italian coast on 13th january 2012.Now Costa Crociere will salvage the cruise ship and remove it. also see "Costa Concordia disaster "
https://wn.com/Costa_Concordia_The_Shipwreck_Removal_Project
Project Baseline St.Lawrence River - Survey of the A.E. Vickery shipwreck

Project Baseline St.Lawrence River - Survey of the A.E. Vickery shipwreck

  • Order:
  • Duration: 14:06
  • Updated: 31 Aug 2013
  • views: 634
videos
The Northeast Underwater Explorers embarked on their first project to create a baseline of measurements and observations of the shipwreck, A. E. Vickery. The information will be documented and posted for future reference for the purpose of evaluating the deterioration over time and making decisions about its conservation. The A. E. Vickery was a three masted schooner built and launched in 1861 as the "J.B.Penfield". She was renamed in 1884 as the A. E. Vickery. She was sailing from Chicago to Prescott carrying a cargo of 21,000 bushels of corn. On August 15, 1889 in the St. Lawrence River she had to make a tack to clear the lighthouse on Rock Island but missed stays in coming about and struck a shoal. She hung on to the rocks for 4 hours before slipping beneath the waters. No one on board was injured. - See more at: http://projectbaseline.org/projects/usa/st-lawrence-river#sthash.1T5Yr2LG.dpuf Area site: http://northeastunderwaterexplorers.org/neue/ United States
https://wn.com/Project_Baseline_St.Lawrence_River_Survey_Of_The_A.E._Vickery_Shipwreck
19 Most Famous Shipwrecks

19 Most Famous Shipwrecks

  • Order:
  • Duration: 10:36
  • Updated: 16 Jun 2017
  • views: 189235
videos
After a life at sea, where do ships and submarines go when they retire? Why, they haunt still shores or stayed beached on dry land as they slowly rust and erode. Here are some of the most famous shipwrecks where they ended up. Subscribe to Talltanic http://goo.gl/wgfvrr 10. Sleeping Bear The shipwrecks found beneath the water’s surface in Sleeping Bear on located near the Lower Peninsula of Lake MIchigan. A famous ship found here was the Francisco Morazan, which sailed off from the city of Chicago back in 1960. There was over 940 tons of cargo when it was met with fog and snow, which proved too much for the ship. In the end, it was abandoned by the next month, which left the ship to just sink and rust into the lake waters since the owners of the ship were never found and there was no one to deal with the removal of it from the water. 9. Landévennec This ship yard is located along the Aulne River in north west France. Most of the ships seen here are military vessels near Pen Forn. The mountains surrounding the waters not only help it the site from being an eyesore, but their presence apparently help keep the water calm, ultimately making for a smoother decomposition of the old ships to disintegrate better. 8. Alexandrovsk-Sakhalinsky On the shores of this Russian town are lines of old submarines that sit decomposing in the water. These abandoned submarines are partially sunk in the water as they just await to rust. No one is sure just how many submarines can be found in these waters, nor is much else known about their condition or purpose. 7. Bikini Atoll Bikini Atoll is known as being a nuclear testing site, and it’s also a location where ships have sunk, creating an old shipyard site for the old sea vessels. The ships were part of atomic tests during the 1940s, one such being the USS Independence. Not only that, but there’s aid to be over 55 gallons of radioactive waste in drums dumped here as well. The USS Saratoga lies here as well, with a lot of the vessels found here having been forgotten about. 6. Sha’b Abu Nuhas In the depths of the Red Sea is a location referred to as the Wrecks of Abu Nuhas. It is the site of at least 7 shipwrecks that lie near the triangle shaped coral reef near the north western part of Shadwan Island. Of the ships were is the SS Carnatic, Olden, Kimon M, and as seen pictured here, The Giannis D. Divers come here all the time to check out the metal ruins of old ships that have met their demise in the open waters. Along with the rusted metal is a diverse amount of wildlife that also makes it a popular diving site. 5. Jervois Basin This body of water is seen an unfit for swimming, but that doesn’t stop people from checking out the wrecks found at the Jervois Basin in South Australia near the upper region of Port Adelaide River. Here you can see the skeletal remains of old ships in the process of ship breaking. It’s not the active ship breaking yard it once ways, and remnants of that part of history can still be seen here. 4. Curtin Artificial Reef It is one of the largest Reef Projects in the world and has been a site of wrecked sea vessels since 1968. Since then there have been over 32 ships, buoys, cars, and other pieces of vehicles and vessels that have been allowed to sink and become part of the reef. This shipwreck in Australia was established by the Underwater Research Group of Queensland and is a project that has attracted much more marine life to the waters. 3. Aral Sea The dry sand pictured here would be the last place you think you’d see so many ships come together as they sit all run down in the sun, and yet the ships on the Aral Sea are some of the most prominent and famous in the world. Located in a basin in the border of the countries of Kazakhstan and Uzbekistan, the shipwrecks of the Aral Sea have been a strange sight to behold ever since the level of the sea started to rapidly decline by the 1960s. 2. Skeleton Coast If these skull and crossbones gates are anything to go by, it the fact that Skeleton Coast in Namibia are one of the most well known shipwrecks in the world. Skeleton Coast is found along the coast of Namibia along a coast that touches that Atlantic Ocean. Rusted ships have been beached here, the environment rusting and breaking them down to seem like skeletal formations along the beach. Gadani This is one of the top 3 largest ship breaking yards in the world and is still one of the most active. Gadani, located 50 miles northwest of Karachi, Pakistan, is a yard that is the location of 132 ship breaking plots. A few decades ago, it was the largest ship breaking yard in the world, and even now that it has been surpassed on that front, it is still one of the most well known and leads the world in its ship breaking efficiency.
https://wn.com/19_Most_Famous_Shipwrecks
ABANDONED SHIPWRECK visited by US Navy Divers

ABANDONED SHIPWRECK visited by US Navy Divers

  • Order:
  • Duration: 16:24
  • Updated: 09 Nov 2016
  • views: 4065
videos
The up-and-coming device is known as the Dive Buddy Remotely Operated Vehicle (DBROV). The Dive Buddy is a purpose-built hybrid vehicle that can be operated as a ROV, a Diver Propulsion Vehicle (DPV), an Autonomous Underwater Vehicle (AUV), or any combination of the three. Lee Cofer, NSWC PCD electronics engineer and Dive Buddy project lead, says the DBROV has a variety of beneficial aspects which will significantly improve efficiency and effectiveness of the diver’s assignments. “I believe all Navy diving will benefit from the Dive Buddy, in particular, expeditionary diving,” said Cofer. Cofer said the Dive Buddy was created to fulfill the need for a fly-away, agile base unmanned underwater vehicle (UUV) platform with autonomous capabilities that is scalable and adaptable to the diver’s needs. Also, there is a need for a platform to have the ability to be outfitted with equipment and sensors that divers need for their specific mission at hand. The DBROV is able to carry backup life-support systems, tools, items of interest, perform dive site reconnaissance and tagging, navigate and transport the diver to dive sites, perform small area searches and provide forward looking sonar information and voice/video/data communications to the surface. During the process of developing the DBROV, the team of Navy scientists and engineers met with divers and individuals in the Navy diving community to get their input about what functions they need in a system. Cofer refers to the need for such an unmanned system capability as three-pronged. “The first need is for a system that can aid in decision support by providing dive supervisors and their teams with real time sensor feeds providing information on critical aspects of their underwater mission,” Cofer said. “The final is the human and machine teaming aspect that multiplies the diver’s effectiveness.” Cofer added that while the diver is the most critical and capable component in a dive mission, some tasks that are simple and/or repetitive can be assisted by or offloaded to an unmanned system. By doing this, there is better utilization of the limited bottom time of the diver for the more complex tasks that require greater agility. The DBROV will not only increase diver safety, but it provides decision support through harvesting a greater situational awareness and command and control for dive supervisors. Command and control is part of a three-tier technology pillar for Initial Response Diving, which also includes thermal management and decompression support. According to Cofer, it is beneficial for the fleet to use this system. “Navy capability for subsea human intervention that is rapid, low cost, and safe is extremely limited yet critical for all domain access, maritime security, power projection and sea control missions. Divers are necessary for these missions until the situational awareness, adaptability, agility and dexterity of a diver is duplicated in machines, likely decades from now. Meanwhile, unmanned systems are needed to sustain the Navy’s undersea asymmetric advantage,” said Cofer. “Addressing these operations by teaming divers with a specialized UUV has potential to safely achieve greater capability while addressing numerous documented mission needs.” Examples of missions the DBROV would be useful include disabled submarine escape assessment or assistance and recovery of classified debris before they are reached by hostile forces. In closing, Cofer stressed the significance of the Dive Buddy development, but explained it is not a replacement for human interaction. “DBROV is not a replacement for a diver, but a tool in their tool belt,” Cofer said. “The DBROV/diver relationship is an example of human and machine symbiosis.” All manufacturing of the Dive Buddy is completed in-house at NSWC PCD. Along with benefitting the fleet, this project was used as an innovative mentorship tool to allow seasoned scientists and engineers to foster learning with the up and coming workforce. The DBROV efforts are part of the Navy Innovative Science and Engineering (NISE) program, a sub effort of the Office of Naval Research’s (ONR) N-STAR program. Video Description Credit: Katherine Mapp Edited by ArmedForcesUpdate Video Credits: Mass Communication Specialist 2nd class Wyatt Huggett, Petty Officer 1st Class George Degener, Petty Officer 1st Class Brett Cote, Petty Officer 3rd Class Kelly Parker, Petty Officer 2nd Class Taylor Smith, Jacqui Barker, Petty Officer 2nd Class Glenn Slaughter, Staff Sgt. Adam Fischman and Staff Sgt. Caleb Barrieau Video Thumbnail Credit: Juha Flinkman, SubZone OY This photo is licensed under the Creative Commons Attribution-Share Alike 4.0 International license. Licence link: https://creativecommons.org/licenses/by-sa/4.0/deed.en This Photo has been modified by ArmedForcesUpdate
https://wn.com/Abandoned_Shipwreck_Visited_By_US_Navy_Divers
Sunken Ship Rescue  New Documentary: "ADVENTURE OF SOMEONE" (2015) (HD)

Sunken Ship Rescue New Documentary: "ADVENTURE OF SOMEONE" (2015) (HD)

  • Order:
  • Duration: 53:12
  • Updated: 10 Feb 2016
  • views: 23728
videos
Follow the epic operation to secure, raise, and salvage the Costa Concordia cruise ship, which ran aground and tragically capsized off the coast of Italy on January 13, 2012, killing 32 people. The massive wreck—with a 160-foot-long hole in its hull—stretches the length of three football fields, weighs 45,000 tons, and was half submerged on the site of a protected reef. Moving it from its precarious perch on the edge of an underwater cliff turned into a technical and logistical challenge of staggering proportions. Join NOVA as we follow a team of more than 500 divers and engineers working around the clock as they attempt the biggest ship recovery project in history. Follow the epic operation to secure, raise, and salvage the Costa Concordia cruise ship, which ran aground and tragically capsized off the coast of Italy on January 13, 2012, killing 32 people. The massive wreck—with a 160-foot-long hole in its hull—stretches the length of three football fields, weighs 45,000 tons, and was half submerged on the site of a protected reef. Moving it from its precarious perch on the edge of an underwater cliff turned into a technical and logistical challenge of staggering proportions. Join NOVA as we follow a team of more than 500 divers and engineers working around the clock as they attempt the biggest ship recovery project in history. https://youtu.be/RxOMO1KkvKs
https://wn.com/Sunken_Ship_Rescue_New_Documentary_Adventure_Of_Someone_(2015)_(Hd)
Shipwreck Letterpress (Kickstarter Video)

Shipwreck Letterpress (Kickstarter Video)

  • Order:
  • Duration: 3:34
  • Updated: 18 Aug 2017
  • views: 0
videos
Hand made, paper cut, cards, invitations, and curios. Check out the Kickstarter campaign here: https://www.kickstarter.com/projects/1514646006/shipwreck-letterpress
https://wn.com/Shipwreck_Letterpress_(Kickstarter_Video)
Simple Wood Projects: Make a Cutting Board

Simple Wood Projects: Make a Cutting Board

  • Order:
  • Duration: 6:15
  • Updated: 03 Jun 2016
  • views: 8126
videos
Watch a few of Eagle America's most popular router bits in action in this simple cutting board project video! Then visit http://bit.ly/2aH98Uq for more detailed information about our 8-Piece, Complete CNC Router Bit Sets.
https://wn.com/Simple_Wood_Projects_Make_A_Cutting_Board
New Shipwreck Discovered with GoPro and ScoutPro Housing! 900ft (300m) Deep!

New Shipwreck Discovered with GoPro and ScoutPro Housing! 900ft (300m) Deep!

  • Order:
  • Duration: 0:59
  • Updated: 04 Dec 2013
  • views: 3332
videos
A huge congrats to Mr. Aharon "Ronnie" Sade of Yam-Yafo Ltd. for discovering a new uncharted, unknown shipwreck off the Israeli Coast. This unidentified wreck is over 900ft deep (300m). Mr. Sade was using a GoPro and our specialized extreme depth underwater housing. For such a fantastic discovery, GroupBinc.com is naming Mr. Sade as our Explorer of the Year. Mr Sade's company , Yam-yafo Ltd, is a Marine Projects & Data Providers Business. Based in Israel and known as the local market leader for marine geographic Information services since 2011. They assist both public and private sector organizations deliver their marine responsibilities. Again, a big congrats to Mr Sade for exploring the deep seas and discovering this shipwreck. We look forward to see more footage! Copyright Groupbinc.com 2013. All Rights Reserved. Music is used under Creative Commons License (creativecommons.org) Kevin McLeods Back to Basic 2 incomptech.com. GroupBinc.com is not associated in any way with GoPro. GoPro is a registered trademark.
https://wn.com/New_Shipwreck_Discovered_With_Gopro_And_Scoutpro_Housing_900Ft_(300M)_Deep
Shipwreck Ft. Mia Vaile - Pain (Non Copyrighted Trap)

Shipwreck Ft. Mia Vaile - Pain (Non Copyrighted Trap)

  • Order:
  • Duration: 3:28
  • Updated: 23 Oct 2016
  • views: 19965
videos
Music That Lifts Up Your Day! Help us reach 100k! http://tinyurl.com/p2hcmgo Download this song here for free [subscription to channel required]; http://tinyurl.com/gqkovqc -- Audio Spectrum, Background, and Intro By; http://tinyurl.com/j9vl6al -- ►Copy and paste the following to use in your description!; Support ÉWN; ► Soundcloud; https://soundcloud.com/ewnmusic ► Facebook; https://www.facebook.com/ewnmusic/ Support FlyingTunes; ► Youtube; https://tinyurl.com/hr534uv ► Twitch; https://www.twitch.tv/flyingtuneslive ► Twitter; https://twitter.com/FlyingTunesYT ► PSN; FlyingTunesPlays ► Instagram; https://www.instagram.com/flyingtunesft ► Vabble; http://www.vabble.com/profile/FlyingTunes/wall ► Vine; https://vine.co/u/1330988332674613248 ► SnapChat; flyingtunes ► Spread Shirt; https://shop.spreadshirt.net/FlyingTunes -- All FlyingTunes Playlists; Non Copyrighted Dubtsep; https://www.youtube.com/playlist?list=PLNXt4mGJMAQrC7Q8Lnh1BhGOKcwW1gRtF Non Copyrighted Remixes; https://www.youtube.com/playlist?list=PLNXt4mGJMAQraOmMLEyIaV4-WjoVjZlXv Non Copyrighted Trap; https://www.youtube.com/playlist?list=PLNXt4mGJMAQqNIhbPH-grPkxYSoovDUy_ Non Copyrighted House; https://www.youtube.com/playlist?list=PLNXt4mGJMAQq4sl1c6H5An33Od4niFMjK Non Copyrighted Rock; https://www.youtube.com/playlist?list=PLNXt4mGJMAQofzKf3z0sD1cvnm_dY-gDU Non Copyrighted Gaming Music; https://www.youtube.com/playlist?list=PLNXt4mGJMAQo317PGgDqgoprqzaY5Vsxu Non Copyrighted Orchestral Music; https://www.youtube.com/playlist?list=PLNXt4mGJMAQp_qOCrXR4isWlZM2MJGuUb All FT Release; https://www.youtube.com/playlist?list=PLNXt4mGJMAQpciJbOTzPjrH5YzwGbDHzu Official Music Videos; https://www.youtube.com/playlist?list=PLNXt4mGJMAQr8zHsOPNcgWQX_71ybEyIx Sponsorship's; Get discount on games at G2A; https://www.g2a.com/r/flyingtunesplays -- Hello and welcome to FlyingTunes. Here you will find the newest upcoming artists! Any sort of music you want for your videos, streams or projects we have! Rap, house, trap, dubstep, rock, gaming music and all in between! All songs are free to use if they have non copyrighted in the title (some remixes arent free to use but are so good they have to be promoted!). Hope you like the music and have a use for it! Also here is the FT (FlyingTunes) label dedicated to supporting upcoming artists! And the best free music! (Through submissions) -------------------------------------------------------------------------- Audio Spectrum, Background, and Intro By; http://tinyurl.com/j9vl6al *This video may cause discomfort to people with photosensitive epilepsy or other photo-sensitivity related conditions, viewer discretion is advised.*
https://wn.com/Shipwreck_Ft._Mia_Vaile_Pain_(Non_Copyrighted_Trap)
How To CNC 3D Carve Aluminum & Wood to Create "Shipwreck" using CorelDraw, ArtCam and Amana CNC Bits

How To CNC 3D Carve Aluminum & Wood to Create "Shipwreck" using CorelDraw, ArtCam and Amana CNC Bits

  • Order:
  • Duration: 4:00
  • Updated: 08 Nov 2016
  • views: 9258
videos
http://www.toolstoday.com Watch this video as we 3D carve a custom-designed CNC distressed art project "Shipwreck" from 0.07" thick aluminum and 1-1/2" thick wood using Amana Tool®’s industrial solid carbide CNC router bits. Sketching the concept with a pencil, Pierre-Luc Arseneau from CNCcraze.com draws the ships hull with riveted panels and the gears inside representing the engine. Knowing this will be 3D carved on his CNC machine, Pierre precisely draws each rivet and gear to look similar to a ship relic from the early 20th century. Pierre scans the drawing, imports the file into Corel Draw and begins to trace his artwork creating the vectors. After creating the digital render for both the exterior aluminum hull and the underlaying wood gears, he opens the file with ArtCam to create and simulate his tool paths. Now that the digital file is prepared for cutting, he transfers the file to a portable USB drive and inserts the drive into his CNC machine. Pierre will insert his tools and center his X, Y and Z axis before making his initial cut on his General® iCarver CNC machine. Note: Oil is used for extended tool life and to reduce flying chips in the workshop. Step 1. Amana Tool® 1/8" Dia. Solid Carbide Spiral 3D Carving Tapered Ball Nose CNC Router Bit with ZrN Coating no. 46288 makes hundreds of passes on the aluminum to carve out each rivet and panel line of the hull. Step 2. Amana Tool® 1/4” Dia. Spiral ‘O' Flute CNC Router Bit with mirror finish No. 51402 cuts out the perimeter aluminum portion that will reveal the carved wood underneath. Step 2. Amana Tool® 1/4” Dia. Solid Carbide Spiral Flute Plunge CNC Router Bit No. 46415 removes the bulk of the wood for the smaller diameter tool to perform the detailed carving in the next step. Step 3. Amana Tool® 1/16” Dia. Solid Carbide Spiral 3D Carving Tapered Ball Nose CNC Router Bit with ZrN Coating no. 46282 uses it’s narrow diameter tip to carve extreme detail in the wood. As this tool makes each pass you can see the gear design revealing more detail until it is complete. Step 4. Amana Tool® 1/8” Dia. Solid Carbide Spiral Ball Nose Flat Bottom 3D Carving CNC Router Bit with ZrN Coating No. 46573 plunges deep around the border to cut out the wood gears for the next process: finishing! Step 5. Using Minwax wood finish stain color Espresso brown No. 273, Pierre uses a small painters brush to apply the stain into the deep relief carvings. Pierre then uses white pastels to provide a distressed look to the wood, clear coats it, glues the aluminum on top and then shapes the aluminum with pliers to look like the hull of a ship was torn open revealing the ships engine. Amazing! Feed, Speed & Step Down Technical Information: 1/8" Dia Solid Carbide Spiral Ball Nose 3D Carving CNC ZrN Coated Up Cut Router Bit No. 46288 http://tinyurl.com/ama46288 Feed Rate (IPM): 105 Speed (RPM): 21,000 Chip Load (Per Tooth): 0.002" Step Down (Per Pass): 0.060" 1/4" Dia Solid Carbide Spiral ‘O’ Flute Plunge Down Cut CNC Router Bit with Mirror Finish No. 51502 http://tinyurl.com/ama51502 Feed Rate (IPM): 50 Speed (RPM): 21,000 Chip Load (Per Tooth): 0.002" Step Down (Per Pass): 0.125" 1/4" Dia. Solid Carbide Spiral Flute Plunge CNC Router Bit No. 46415 http://tinyurl.com/ama46415 Feed Rate (IPM): 106 Speed (RPM): 21,000 Chip Load (Per Tooth): 0.003" Step Down (Per Pass): 0.250" 1/16" Dia Solid Carbide Spiral Ball Nose 3D Carving CNC ZrN Coated Up Cut Router Bit No. 46282 http://tinyurl.com/ama46282 Feed Rate (IPM): 126 Speed (RPM): 21,000 Chip Load (Per Tooth): 0.002" Step Down (Per Pass): 0.039" 1/8" Dia Solid Carbide Spiral Flat Bottom 3D Carving CNC ZrN Coated Up Cut Router Bit No. 46573 http://tinyurl.com/ama46573 Feed Rate (IPM): 100 Speed (RPM): 21,000 Chip Load (Per Tooth): 0.002" Step Down (Per Pass): 0.250" Shipwreck designed by ToolsToday and Pierre-Luc Arseneau, visit Pierre's website http://www.cnccraze.com Purchase the digital file for 3D wood carving Shipwreck here: https://cnccraze.com/collections/pla3d/products/shipwreck Shipwreck video built with Amana Tool® Solid Carbide Spiral ‘O' Flute and Spiral 2D/3D Carving CNC Router Bits, by ToolsToday.
https://wn.com/How_To_Cnc_3D_Carve_Aluminum_Wood_To_Create_Shipwreck_Using_Coreldraw,_Artcam_And_Amana_Cnc_Bits
SHIPWRECK on Farland Isle Adventure Project for D&D Part1

SHIPWRECK on Farland Isle Adventure Project for D&D Part1

  • Order:
  • Duration: 8:35
  • Updated: 17 Apr 2014
  • views: 6963
videos
DM Scotty Shows you how to easily and cheaply craft ship wreak pieces for your own Island adventures. Follow DM Scotty's Facebook group for DM's Craft updates and info: https://www.facebook.com/groups/dmscottyscraftsngames/ Visit the DM's Craft Forum to meet other crafters, see cool pics of crafted stuff and pick up great tips and tricks: http://dmscraft.proboards.com/ A special thanks to Mad Lad Designs, AJ and DMG for helping to moderate The DM's Craft forum. Also vist TheDMGinfo channel for more great 2.5D projects and ideas: https://www.youtube.com/channel/UCJLqz6kcB1gMPiVnL0XfUDg
https://wn.com/Shipwreck_On_Farland_Isle_Adventure_Project_For_D_D_Part1
How to make Shipwreck chart Nautical Coasters Easy DIY for Beach decor homes.

How to make Shipwreck chart Nautical Coasters Easy DIY for Beach decor homes.

  • Order:
  • Duration: 3:44
  • Updated: 29 Mar 2015
  • views: 1203
videos
How to make nautical shipwreck chart Coasters. Easy DIY (Do it yourself) project. Unlike many coaster how to videos that just use Mod Podge we recommend using a two part epoxy so the finished drink coasters will hold up to both hot and cold drinks. Check out our other DIY projects. WEB http://www.diyeasycrafts.com/ DIY Nautical Themed Projects http://www.diyeasycrafts.com/diy-nautical-ideas-and-projects.html Please join us on: FACEBOOK https://www.facebook.com/groups/1668357033451028/ PINTEREST https://www.pinterest.com/wreckvalle/diy-easy-crafts/ #DIYeasycrafts
https://wn.com/How_To_Make_Shipwreck_Chart_Nautical_Coasters_Easy_Diy_For_Beach_Decor_Homes.
Finished Shipwreck on Farland Isle Adventure Project for D&D Part2

Finished Shipwreck on Farland Isle Adventure Project for D&D Part2

  • Order:
  • Duration: 5:48
  • Updated: 21 Apr 2014
  • views: 5480
videos
DM Scotty finished up those wrecked ship pieces and shows you what they look like washed up on Farland Isle. Follow DM Scotty's Facebook group for DM's Craft updates and info: https://www.facebook.com/groups/dmscottyscraftsngames/ Visit the DM's Craft Forum to meet other crafters, see cool pics of crafted stuff and pick up great tips and tricks: http://dmscraft.proboards.com/ A special thanks to Mad Lad Designs, AJ and DMG for helping to moderate The DM's Craft forum. Also vist TheDMGinfo channel for more great 2.5D projects and ideas: https://www.youtube.com/channel/UCJLqz6kcB1gMPiVnL0XfUDg
https://wn.com/Finished_Shipwreck_On_Farland_Isle_Adventure_Project_For_D_D_Part2
Mardi Gras Shipwreck Project – Artifacts 03

Mardi Gras Shipwreck Project – Artifacts 03

  • Order:
  • Duration: 1:16
  • Updated: 14 Aug 2017
  • views: 23
videos
Mardi Gras Shipwreck ProjectArtifacts - 03. http://nautilusproductions.com/projects/mystery-mardi-gras-shipwreck-documentary. The re-release of these project videos celebrates the publication of the Society for Historical Archaeology’s Journal, Historical Archaeology Mardi Gras Shipwreck Thematic Issue and the 10 year anniversary of the expedition. Nautilus' intellectual property is copyrighted & not in the public domain but can be licensed at; http://nautilusproductions.com/stock-footage. All of the content on this channel, including, but not limited to photos, video, images and text are the exclusive intellectual property of Nautilus Productions. This content is protected by US and International copyrights. No content may be copied, reproduced, republished, altered, transmitted or distributed in any way without the express written permission and/or payment of a fee or other arrangement. The content of this site is NOT ROYALTY FREE and is NOT WITHIN THE PUBLIC DOMAIN. You may only view the content for your personal, non-commercial use. Use of the content for any other purpose including but not limited to the use of the content as a basis for another concept or story concept is a violation of Nautilus copyrights. Infringement of these user agreement terms will constitute a copyright violation and result in a notification of payment due at the industry standard triple fee for unauthorized usage and/or criminal prosecution.
https://wn.com/Mardi_Gras_Shipwreck_Project_–_Artifacts_03
Fasteners on a Stone Fleet Shipwreck

Fasteners on a Stone Fleet Shipwreck

  • Order:
  • Duration: 1:14
  • Updated: 08 May 2015
  • views: 136
videos
A brief clip of underwater footage of some copper-alloy fasteners observed on a wreck of a whaling vessel from the second Stone Fleet sunk off the coast of Charleston in January 1862. This footage was shot April 22, 2015 during the Charleston Harbor Stone Fleet Survey Project. For moe info and updates on Maritime Research Division projects past and present, see our website: http://artsandsciences.sc.edu/sciaa/mrd or follow us on Facebook: www.facebook.com/MaritimeResearchDivision
https://wn.com/Fasteners_On_A_Stone_Fleet_Shipwreck
Mardi Gras Shipwreck Project – Launch 01

Mardi Gras Shipwreck Project – Launch 01

  • Order:
  • Duration: 1:00
  • Updated: 14 Aug 2017
  • views: 22
videos
Mardi Gras Shipwreck ProjectLaunch 01. http://nautilusproductions.com/projects/mystery-mardi-gras-shipwreck-documentary. The re-release of these project videos celebrates the publication of the Society for Historical Archaeology’s Journal, Historical Archaeology Mardi Gras Shipwreck Thematic Issue and the 10 year anniversary of the expedition. Nautilus' intellectual property is copyrighted & not in the public domain but can be licensed at; http://nautilusproductions.com/stock-footage. All of the content on this channel, including, but not limited to photos, video, images and text are the exclusive intellectual property of Nautilus Productions. This content is protected by US and International copyrights. No content may be copied, reproduced, republished, altered, transmitted or distributed in any way without the express written permission and/or payment of a fee or other arrangement. The content of this site is NOT ROYALTY FREE and is NOT WITHIN THE PUBLIC DOMAIN. You may only view the content for your personal, non-commercial use. Use of the content for any other purpose including but not limited to the use of the content as a basis for another concept or story concept is a violation of Nautilus copyrights. Infringement of these user agreement terms will constitute a copyright violation and result in a notification of payment due at the industry standard triple fee for unauthorized usage and/or criminal prosecution.
https://wn.com/Mardi_Gras_Shipwreck_Project_–_Launch_01
×